PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S1436B9219
S1436B9219 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, special_features: ONE HOLE 3/8-16 UNC THREAD 0.625 IN. DEEP CENTERED ON END ALONG LONGITUDINAL CENTERLINE IN, pin_overall_length: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN, pin_overall_diameter: 0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-660-0734, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1436B9219
NSN: 5315-00-660-0734
FSC: 5315
CAGE: 59180 — CIRCOR PUMPS NORTH AMERICA LLC (USA)
SPECIFICATIONS
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
special_featuresONE HOLE 3/8-16 UNC THREAD 0.625 IN. DEEP CENTERED ON END ALONG LONGITUDINAL CENTERLINE IN
pin_overall_length1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
pin_overall_diameter0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-660-0734
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S1436B9219 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1048 OR STEEL COMP 1049 OR STEEL COMP 1050 OVERALL
•
PIN OVERALL LENGTH: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1048 OR STEEL COMP 1049 OR STEEL COMP 1050 OVERALL
PIN OVERALL LENGTH1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SPECIAL FEATURESONE HOLE 3/8-16 UNC THREAD 0.625 IN. DEEP CENTERED ON END ALONG LONGITUDINAL CENTERLINE IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
00331Interchangeable
interchangeable cross-reference
interchangeable
00346Interchangeable
interchangeable cross-reference
interchangeable
SG3946PC5Interchangeable
Same NIIN cross-reference
interchangeable
SG3939PC5Interchangeable
Same NIIN cross-reference
interchangeable
SG3745PC5Interchangeable
Same NIIN cross-reference
interchangeable
SG3940PC5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1436B9219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1436B9219?
S1436B9219 is a PIN,STRAIGHT,HEADLESS.
What parts can replace S1436B9219?
There are 8 known substitutes for S1436B9219: 00331, 00346, SG3946PC5 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1436B9219?
S1436B9219 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-660-0734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1436B9219

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026