PartsTable
Technical Data Sheet
Download PDF

S14-35-4450 — DEFLECTOR,DIRT AND LIQUID

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S14-35-4450: DEFLECTOR,DIRT AND LIQUID.

The DEFLECTOR,DIRT AND LIQUID is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316, inside_diameter: 0.789 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN, outside_diameter: 1.620 INCHES NOMINAL IN, style_designator: ROUND, TAPERED, surface_treatment: PASSIVATE, material_thickness: 0.015 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-565-3602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S14-35-4450
NSN: 5340-00-565-3602
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316
inside_diameter0.789 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
outside_diameter1.620 INCHES NOMINAL IN
style_designatorROUND, TAPERED
surface_treatmentPASSIVATE
material_thickness0.015 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-565-3602
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S14-35-4450 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ROUND, TAPERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 1.620 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.789 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORROUND, TAPERED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER1.620 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
INSIDE DIAMETER0.789 INCHES MINIMUM AND 0.794 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1560UH19-233-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S14-35-4450?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S14-35-4450?
S14-35-4450 is a DEFLECTOR,DIRT AND LIQUID.
What parts can replace S14-35-4450?
There is 1 known substitute for S14-35-4450: 1560UH19-233-3. Substitute compatibility should be verified for your specific system.
What is the NSN for S14-35-4450?
S14-35-4450 is cataloged in the U.S. Government catalog under NSN 5340-00-565-3602. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S14-35-4450