S127 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

S127: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include end_item_identification: 2815-01-631-9826, part_name_assigned_by_controlling_agency: SCREW, HEXAGON HEAD. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-069-5582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ S127

NSN: 5305-00-069-5582
NIINs: 000695582, 004600451, 011640194, 013113362, 016640623
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

end_item_identification	2815-01-631-9826
part_name_assigned_by_controlling_agency	SCREW, HEXAGON HEAD
NSN	5305-00-069-5582

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN

•

FASTENER LENGTH: 3.750 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 1.125 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN

•

HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.438 INCHES IN

•

HEAD STYLE: HEXAGON

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FASTENER LENGTH	3.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	1.125 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
HARDNESS RATING	23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.438 INCHES IN
HEAD STYLE	HEXAGON
THREAD DIRECTION	RIGHT-HAND
WIDTH BETWEEN FLATS	0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 6

FF-S-85Reference document

Same NSN cross-reference

Reference document — Identification reference

10087734Reference document

Same NSN cross-reference

Reference document — Informative reference only

NASM90725Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

5305000695582Reference document

Same NSN cross-reference

Reference document — Informative reference only

MS90725-98Reference document

Same NSN cross-reference

Reference document — Secondary reference

FF-S-85CReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy S127?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S127?

S127 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace S127?

There are 6 known substitutes for S127: FF-S-85, 10087734, NASM90725 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for S127?

S127 is cataloged in the U.S. Government catalog under NSN 5305-00-069-5582. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S127 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — S127