PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S12604-117
S12604-117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, center_hole_diameter: 0.815 INCHES NOMINAL IN, cross-sectional_height: 0.183 INCHES NOMINAL IN, material_document_and_classification: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-9728, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S12604-117
NSN: 5330-00-364-9728
FSC: 5330
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
center_hole_diameter0.815 INCHES NOMINAL IN
cross-sectional_height0.183 INCHES NOMINAL IN
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-364-9728
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S12604-117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE DIAMETER: 0.815 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.183 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE DIAMETER0.815 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL HEIGHT0.183 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
S2710Interchangeable
interchangeable cross-reference
interchangeable
Q1832Interchangeable
interchangeable cross-reference
interchangeable
8M4067CInterchangeable
interchangeable cross-reference
interchangeable
30214-3Interchangeable
interchangeable cross-reference
interchangeable
S122Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S12604-117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S12604-117?
S12604-117 is a RETAINER,PACKING.
What parts can replace S12604-117?
There are 13 known substitutes for S12604-117: S2710, Q1832, 8M4067C and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S12604-117?
S12604-117 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-9728. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S12604-117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026