PartsTable
Technical Data Sheet
Download PDF

S124682-4-13-6 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S124682-4-13-6: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN, hole_diameter: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, hardness_rating: 88.0 ROCKWELL B NOMINAL, overall_diameter: 0.807 INCHES MINIMUM AND 0.832 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-680-3004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S124682-4-13-6
NSN: 5310-00-680-3004
FSC: 5310 — Nuts and Washers
CAGE: 70265 — ALL POWER MANUFACTURING CO. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
hole_diameter0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
hardness_rating88.0 ROCKWELL B NOMINAL
overall_diameter0.807 INCHES MINIMUM AND 0.832 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-S-698, 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-680-3004
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S124682-4-13-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.807 INCHES MINIMUM AND 0.832 INCHES MAXIMUM IN
•
HARDNESS RATING: 88.0 ROCKWELL B NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698, 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.807 INCHES MINIMUM AND 0.832 INCHES MAXIMUM IN
HARDNESS RATING88.0 ROCKWELL B NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698, 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
FF-W-92BReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S124682-4-13-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S124682-4-13-6?
S124682-4-13-6 is a WASHER,FLAT.
What parts can replace S124682-4-13-6?
There is 1 known substitute for S124682-4-13-6: FF-W-92B. Substitute compatibility should be verified for your specific system.
What is the NSN for S124682-4-13-6?
S124682-4-13-6 is cataloged in the U.S. Government catalog under NSN 5310-00-680-3004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S124682-4-13-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.