PartsTable
Technical Data Sheet
PartsTable / MRO / S1210
S1210 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: SILICON SEMICONDUCTOR, body_width: 1.290 INCHES MINIMUM AND 1.330 INCHES MAXIMUM IN, body_height: 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN, body_length: 1.350 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSED, overall_length: 0.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-9725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ S1210
NSN: 5330-00-364-9725
FSC: 5330
CAGE: 98391 — ARKWIN INDUSTRIES, INC. DBA ARKWIN INDUSTRIES INC (USA)
SPECIFICATIONS
materialSILICON SEMICONDUCTOR
body_width1.290 INCHES MINIMUM AND 1.330 INCHES MAXIMUM IN
body_height1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
body_length1.350 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_length0.438 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S) SINGLE GROUP
terminal_length1.000 INCHES MINIMUM IN
frequency_rating360.0 HERTZ MINIMUM AND 440.0 HERTZ MAXIMUM SINGLE COMPONENT
overall_diameter0.228 INCHES NOMINAL IN
features_providedHERMETICALLY SEALED CASE
nominal_thread_size0.112 INCHES SINGLE GROUP IN
NSN5330-00-364-9725
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S1210 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
8516106Interchangeable
interchangeable cross-reference
interchangeable
GA10236Interchangeable
interchangeable cross-reference
interchangeable
S1110Interchangeable
interchangeable cross-reference
interchangeable
S1210Interchangeable
interchangeable cross-reference
interchangeable
JP301Interchangeable
interchangeable cross-reference
interchangeable
C50-119Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1210?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1210?
S1210 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace S1210?
There are 6 known substitutes for S1210: 8516106, GA10236, S1110 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1210?
S1210 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-9725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1210

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026