PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S12068-010
S12068-010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, peripheral_diameter: 0.360 INCHES NOMINAL IN, center_hole_diameter: 0.217 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-129-0666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S12068-010
NSN: 5330-01-129-0666
FSC: 5330
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
peripheral_diameter0.360 INCHES NOMINAL IN
center_hole_diameter0.217 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-01-129-0666
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S12068-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.360 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.079 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.360 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.079 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
JM44LC17-H10PBInterchangeable
interchangeable cross-reference
interchangeable
GC500B10Interchangeable
interchangeable cross-reference
interchangeable
S500-10Interchangeable
interchangeable cross-reference
interchangeable
MC15078Interchangeable
interchangeable cross-reference
interchangeable
S12068-010Interchangeable
interchangeable cross-reference
interchangeable
6910NCM116939Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S12068-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S12068-010?
S12068-010 is a RETAINER,PACKING.
What parts can replace S12068-010?
There are 8 known substitutes for S12068-010: JM44LC17-H10PB, GC500B10, S500-10 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S12068-010?
S12068-010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-129-0666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S12068-010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026