PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S1204-12
S1204-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 4.351 INCHES MINIMUM AND 4.423 INCHES MAXIMUM IN, center_hole_diameter: 4.094 INCHES MINIMUM AND 4.124 INCHES MAXIMUM IN, elongation_percentage: 164 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3739, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1204-12
NSN: 5330-00-194-3739
FSC: 5330
CAGE: 92755 — NORTHROP GRUMMAN SYSTEMS CORP DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
peripheral_diameter4.351 INCHES MINIMUM AND 4.423 INCHES MAXIMUM IN
center_hole_diameter4.094 INCHES MINIMUM AND 4.124 INCHES MAXIMUM IN
elongation_percentage164 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5330-00-194-3739
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S1204-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.094 INCHES MINIMUM AND 4.124 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 164 MAXIMUM
•
PERIPHERAL DIAMETER: 4.351 INCHES MINIMUM AND 4.423 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.094 INCHES MINIMUM AND 4.124 INCHES MAXIMUM IN
ELONGATION PERCENTAGE164 MAXIMUM
PERIPHERAL DIAMETER4.351 INCHES MINIMUM AND 4.423 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
N304-7-21Interchangeable
interchangeable cross-reference
interchangeable
AN6230-21Interchangeable
interchangeable cross-reference
interchangeable
2-243 N304-75Interchangeable
interchangeable cross-reference
interchangeable
MS28775-243ESInterchangeable
interchangeable cross-reference
interchangeable
2-243-N304-7Interchangeable
interchangeable cross-reference
interchangeable
AN6230B21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1204-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1204-12?
S1204-12 is a PACKING,PREFORMED.
What parts can replace S1204-12?
There are 20 known substitutes for S1204-12: N304-7-21, AN6230-21, 2-243 N304-75 and 17 more. Substitute compatibility should be verified for your specific system.
Is S1204-12 still available?
S1204-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1204-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026