PartsTable
Technical Data Sheet
PartsTable / O-RING / S11336PC7
S11336PC7 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN, center_hole_diameter: 22.835 INCHES MINIMUM AND 23.045 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-182-3566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S11336PC7
NSN: 5331-00-182-3566
FSC: 5331 — O-RING
CAGE: 13378 — COE MANUFACTURING COMPANY, THE (INC) DBA MOORE INTERNATIONAL DIV (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
outside_diameter23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN
center_hole_diameter22.835 INCHES MINIMUM AND 23.045 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-00-182-3566
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S11336PC7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 22.835 INCHES MINIMUM AND 23.045 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER22.835 INCHES MINIMUM AND 23.045 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2267F17PC16Interchangeable
interchangeable cross-reference
interchangeable
3-904E540-80Interchangeable
interchangeable cross-reference
interchangeable
AS568-904Interchangeable
interchangeable cross-reference
interchangeable
ASTM D2000-M2AA810A13EA14F17Interchangeable
interchangeable cross-reference
interchangeable
2-475E540-80Interchangeable
interchangeable cross-reference
interchangeable
AS568-475Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S11336PC7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S11336PC7?
S11336PC7 is a O-RING.
What parts can replace S11336PC7?
There are 15 known substitutes for S11336PC7: 2267F17PC16, 3-904E540-80, AS568-904 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S11336PC7?
S11336PC7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-182-3566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S11336PC7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026