PartsTable
Technical Data Sheet
PartsTable / O-RING / S11214-240
S11214-240 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, center_hole_diameter: 3.725 INCHES MINIMUM AND 3.743 INCHES MAXIMUM IN, cross-sectional_height: 0.137 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-332-9016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S11214-240
NSN: 5331-00-332-9016
FSC: 5331 — O-RING
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
center_hole_diameter3.725 INCHES MINIMUM AND 3.743 INCHES MAXIMUM IN
cross-sectional_height0.137 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
NSN5331-00-332-9016
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S11214-240 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.137 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE
•
CENTER HOLE DIAMETER: 3.725 INCHES MINIMUM AND 3.743 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.137 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE
CENTER HOLE DIAMETER3.725 INCHES MINIMUM AND 3.743 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1000-013PC18Interchangeable
interchangeable cross-reference
interchangeable
2-240N304-75Interchangeable
interchangeable cross-reference
interchangeable
2300-446 PC 48Interchangeable
interchangeable cross-reference
interchangeable
AN6230-18Interchangeable
Same NIIN cross-reference
interchangeable
8146834Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S11214-240?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S11214-240?
S11214-240 is a O-RING.
What parts can replace S11214-240?
There are 5 known substitutes for S11214-240: 1000-013PC18, 2-240N304-75, 2300-446 PC 48 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S11214-240?
S11214-240 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-332-9016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S11214-240

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026