PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S1107
S1107 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include lens_color: WHITE, lens_surface_condition: SMOOTH BACK, lens_type_and_quantity: 1 TEARDROP, TWO HOLES, voltage_rating_in_volts: 28.0 DC NOMINAL, lamp_base_type_accommodated: SINGLE CONTACT BAYONET CANDELABRA. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-5250, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1107
NSN: 5310-00-012-5250
FSC: 5310
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
lens_colorWHITE
lens_surface_conditionSMOOTH BACK
lens_type_and_quantity1 TEARDROP, TWO HOLES
voltage_rating_in_volts28.0 DC NOMINAL
lamp_base_type_accommodatedSINGLE CONTACT BAYONET CANDELABRA
NSN5310-00-012-5250
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S1107 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD SERIES: UNF
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 20
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.500 INCHES IN
THREAD SERIESUNF
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH20
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD CLASS2B
NUT STYLESLOTTED, HEXAGON
NUT HEIGHT0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
6748Interchangeable
interchangeable cross-reference
interchangeable
6748-00Interchangeable
interchangeable cross-reference
interchangeable
181-17Interchangeable
interchangeable cross-reference
interchangeable
125250Interchangeable
interchangeable cross-reference
interchangeable
521252502Interchangeable
interchangeable cross-reference
interchangeable
S1107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1107?
S1107 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace S1107?
There are 15 known substitutes for S1107: 6748, 6748-00, 181-17 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1107?
S1107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-012-5250. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026