PartsTable
Technical Data Sheet
Download PDF

S11065-0001-5 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S11065-0001-5: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 0.498 INCHES NOMINAL IN, outside_diameter: 0.760 INCHES NOMINAL IN, material_thickness: 0.135 INCHES NOMINAL IN, outer_edge_thickness: 0.104 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-037-6624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S11065-0001-5
NSN: 5330-01-037-6624
FSC: 5330 — Packing and Gasket Materials
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter0.498 INCHES NOMINAL IN
outside_diameter0.760 INCHES NOMINAL IN
material_thickness0.135 INCHES NOMINAL IN
outer_edge_thickness0.104 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
material_document_and_classificationUNABLE TO DECODE
NSN5330-01-037-6624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S11065-0001-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER EDGE THICKNESS: 0.104 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
•
OUTSIDE DIAMETER: 0.760 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.135 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.498 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
OUTER EDGE THICKNESS0.104 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
OUTSIDE DIAMETER0.760 INCHES NOMINAL IN
MATERIAL THICKNESS0.135 INCHES NOMINAL IN
INSIDE DIAMETER0.498 INCHES NOMINAL IN
RING STYLECONCENTRIC
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 1
S11065-1-5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S11065-0001-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S11065-0001-5?
S11065-0001-5 is a RING,WIPER.
What parts can replace S11065-0001-5?
There is 1 known substitute for S11065-0001-5: S11065-1-5. Substitute compatibility should be verified for your specific system.
What is the NSN for S11065-0001-5?
S11065-0001-5 is cataloged in the U.S. Government catalog under NSN 5330-01-037-6624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S11065-0001-5