PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S1102
S1102 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 1.1250 INCHES MINIMUM AND 1.1255 INCHES MAXIMUM IN, overall_width: 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN, administration: INTRAVENOUS AND INTRAMUSCULAR, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8103, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1102
NSN: 3110-00-156-8103
FSC: 3110
CAGE: 11562 — CHAMPION MACHINERY CO (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter1.1250 INCHES MINIMUM AND 1.1255 INCHES MAXIMUM IN
overall_width1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN
administrationINTRAVENOUS AND INTRAMUSCULAR
load_directionRADIAL
surface_finishGROUND
outer_ring_width16.00 MILLIMETERS NOMINAL MM
style_designatorSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
mating_end_quantity1
primary_container_typeBOTTLE, PLASTIC
overall_outside_diameter2.4404 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
NSN3110-00-156-8103
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S1102 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: SINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL INNER RING
STYLE DESIGNATORSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED BOTH SIDES, WITH ECCENTRIC LOCKING COLLAR
MATERIALSTEEL OUTER RING
MATERIALSTEEL BALL
BORE SHAPESTRAIGHT
OVERALL WIDTH1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE DIAMETER1.1250 INCHES MINIMUM AND 1.1255 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
700155Interchangeable
interchangeable cross-reference
interchangeable
1250-0259Interchangeable
interchangeable cross-reference
interchangeable
S1102Interchangeable
interchangeable cross-reference
interchangeable
90-178Interchangeable
interchangeable cross-reference
interchangeable
90-162Interchangeable
interchangeable cross-reference
interchangeable
NDC00264-1110-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S1102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1102?
S1102 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace S1102?
There are 8 known substitutes for S1102: 700155, 1250-0259, S1102 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1102?
S1102 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1102

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026