PartsTable
Technical Data Sheet
Download PDF

S1100-1245770 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S1100-1245770: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include diameter: 1.250 INCHES NOMINAL IN, material: STEEL COMP 1039 OVERALL, head_style: THUMB NO. 9, lanyard_length: 12.500 INCHES NOMINAL IN, special_features: PIN W/HEAD INSERT IN HOLE: TOTAL LENGTH OF PIN IS 4.750 INCHES IN, style_designator: STRAIGHT.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-386-9036, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1100-1245770
NSN: 5315-01-386-9036
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96652 — MEDALIST INDUSTRIES INC LEITZKE DIV (USA)
SPECIFICATIONS
diameter1.250 INCHES NOMINAL IN
materialSTEEL COMP 1039 OVERALL
head_styleTHUMB NO. 9
lanyard_length12.500 INCHES NOMINAL IN
special_featuresPIN W/HEAD INSERT IN HOLE: TOTAL LENGTH OF PIN IS 4.750 INCHES IN
style_designatorSTRAIGHT
pin_attachment_typeCABLE LANYARD W/TERMINATIONS AND RETAINING CHAIN
hole_arrangement_styleONE END DRILLED
NSN5315-01-386-9036
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S1100-1245770 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
PIN ATTACHMENT TYPE: CABLE LANYARD W/TERMINATIONS AND RETAINING CHAIN
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 1.250 INCHES NOMINAL IN
•
HEAD STYLE: THUMB NO. 9
•
MATERIAL: STEEL COMP 1039 OVERALL
•
LANYARD LENGTH: 12.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HOLE ARRANGEMENT STYLEONE END DRILLED
PIN ATTACHMENT TYPECABLE LANYARD W/TERMINATIONS AND RETAINING CHAIN
STYLE DESIGNATORSTRAIGHT
DIAMETER1.250 INCHES NOMINAL IN
HEAD STYLETHUMB NO. 9
SPECIAL FEATURESPIN W/HEAD INSERT IN HOLE: TOTAL LENGTH OF PIN IS 4.750 INCHES IN
MATERIALSTEEL COMP 1039 OVERALL
LANYARD LENGTH12.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
12415770Reference document
Same NSN cross-reference
Reference document — Secondary reference
12415953Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S1100-1245770?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1100-1245770?
S1100-1245770 is a PIN,STRAIGHT,HEADED.
What parts can replace S1100-1245770?
There are 2 known substitutes for S1100-1245770: 12415770, 12415953. Substitute compatibility should be verified for your specific system.
What is the NSN for S1100-1245770?
S1100-1245770 is cataloged in the U.S. Government catalog under NSN 5315-01-386-9036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1100-1245770

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.