PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S10RTFB3
S10RTFB3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.0000 INCHES NOMINAL IN, overall_width: 0.3750 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S10RTFB3
NSN: 3110-00-554-3255
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.0000 INCHES NOMINAL IN
overall_width0.3750 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter2.0000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.3
NSN3110-00-554-3255
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S10RTFB3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 2.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER2.0000 INCHES NOMINAL IN
OVERALL WIDTH0.3750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
BORE DIAMETER1.0000 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
FA100-15PLOEInterchangeable
interchangeable cross-reference
interchangeable
FA100-15PLInterchangeable
interchangeable cross-reference
interchangeable
24153Interchangeable
interchangeable cross-reference
interchangeable
2012-T 54Interchangeable
interchangeable cross-reference
interchangeable
44124Interchangeable
interchangeable cross-reference
interchangeable
350-RTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S10RTFB3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S10RTFB3?
S10RTFB3 is a BEARING,BALL,ANNULAR.
What parts can replace S10RTFB3?
There are 25 known substitutes for S10RTFB3: FA100-15PLOE, FA100-15PL, 24153 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S10RTFB3?
S10RTFB3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S10RTFB3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026