PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S10F32712
S10F32712 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, housing_bore_diameter: 1.628 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-3352, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S10F32712
NSN: 5330-00-291-3352
FSC: 5330
CAGE: 81795 — ALLIANZ SWEEPER COMPANY (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
housing_bore_diameter1.628 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.094 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-3352
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S10F32712 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.094 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MATERIAL: LEATHER SEALING ELEMENT
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.628 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.094 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALLEATHER SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.438 INCHES NOMINAL IN
MATERIALSTEEL CASE
HOUSING BORE DIAMETER1.628 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
18-3-13Interchangeable
interchangeable cross-reference
interchangeable
NMP446PC22Interchangeable
interchangeable cross-reference
interchangeable
A1046SPC24Interchangeable
interchangeable cross-reference
interchangeable
327-12Interchangeable
interchangeable cross-reference
interchangeable
240-1103-00Interchangeable
interchangeable cross-reference
interchangeable
5137HAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S10F32712?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S10F32712?
S10F32712 is a SEAL,PLAIN ENCASED.
What parts can replace S10F32712?
There are 18 known substitutes for S10F32712: 18-3-13, NMP446PC22, A1046SPC24 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S10F32712?
S10F32712 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-3352. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S10F32712

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026