PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S10E30047
S10E30047 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.875 INCHES NOMINAL IN, aperture_width: 3.875 INCHES NOMINAL IN, overall_length: 6.250 INCHES NOMINAL IN, aperture_length: 5.000 INCHES NOMINAL IN, inside_corner_radius: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-355-0972, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S10E30047
NSN: 5330-00-355-0972
FSC: 5330
CAGE: 81795 — ALLIANZ SWEEPER COMPANY (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.875 INCHES NOMINAL IN
aperture_width3.875 INCHES NOMINAL IN
overall_length6.250 INCHES NOMINAL IN
aperture_length5.000 INCHES NOMINAL IN
inside_corner_radius0.500 INCHES NOMINAL IN
outside_corner_radius1.250 INCHES NOMINAL IN
cross-sectional_thickness0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.375 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.375 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-355-0972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S10E30047 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 1.250 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.875 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS1.250 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.375 INCHES NOMINAL IN
APERTURE LENGTH5.000 INCHES NOMINAL IN
APERTURE WIDTH3.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
30047Interchangeable
interchangeable cross-reference
interchangeable
E1201-1-10Interchangeable
interchangeable cross-reference
interchangeable
853926Interchangeable
interchangeable cross-reference
interchangeable
32383Interchangeable
interchangeable cross-reference
interchangeable
23751Interchangeable
interchangeable cross-reference
interchangeable
L5726Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S10E30047?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S10E30047?
S10E30047 is a GASKET.
What parts can replace S10E30047?
There are 20 known substitutes for S10E30047: 30047, E1201-1-10, 853926 and 17 more. Substitute compatibility should be verified for your specific system.
Is S10E30047 still available?
S10E30047 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S10E30047

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026