PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S108A7

S108A7 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, hole_diameter: 0.037 INCHES NOMINAL IN, thread_length: 2.125 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5305-00-780-9617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S108A7
NSN: 5305-00-780-9617
FSC: 5305
CAGE: 96487 — VALCOR ENGINEERING CORPORATION (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
hole_diameter0.037 INCHES NOMINAL IN
hole_quantity1
thread_length2.125 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length2.110 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-780-9617
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: S108A7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HOLE CONFIGURATION STYLE: ROUND
•
THREAD CLASS: 2A A
•
HOLE DIAMETER: 0.037 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
HOLE QUANTITY: 1
TECHNICAL CHARACTERISTICS
SCREW MATERIALSTEEL
THREAD DIRECTIONRIGHT-HAND
HEAD HOLE CONFIGURATION STYLEROUND
THREAD CLASS2A A
HOLE DIAMETER0.037 INCHES NOMINAL IN
INTERNAL DRIVE STYLESLOT
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
HOLE QUANTITY1
HEAD DIAMETER0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
FASTENER LENGTH2.110 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
MS35265-15InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-S-92B TYPE I STYLE 5SInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S108A7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S108A7?
S108A7 is a SCREW,MACHINE.
What parts can replace S108A7?
There are 2 known substitutes for S108A7: MS35265-15, FF-S-92B TYPE I STYLE 5S. Substitute compatibility should be verified for your specific system.
What is the NSN for S108A7?
S108A7 is cataloged in the Federal Logistics Information System under NSN 5305-00-780-9617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S108A7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026