PartsTable
Technical Data Sheet
Download PDF

S1087510-8-12 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

S1087510-8-12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.585 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-965-5882, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1087510-8-12
NSN: 5305-00-965-5882
FSC: 5305 — Screws
CAGE: 18355 — THE BOEING COMPANY (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.585 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-965-5882
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: S1087510-8-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.585 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.585 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 6
1087510-8-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
514 765Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M24693S52Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5305PL1331071Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS24693-S52Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
414 762Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy S1087510-8-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1087510-8-12?
S1087510-8-12 is a SCREW,MACHINE.
What parts can replace S1087510-8-12?
There are 6 known substitutes for S1087510-8-12: 1087510-8-12, 514 765, M24693S52 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S1087510-8-12?
S1087510-8-12 is cataloged in the U.S. Government catalog under NSN 5305-00-965-5882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1087510-8-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.