PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S106269
S106269 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 5.750 INCHES NOMINAL IN, center_hole_diameter: 5.500 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-065-7431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S106269
NSN: 5330-01-065-7431
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter5.750 INCHES NOMINAL IN
center_hole_diameter5.500 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_shape_styleV
NSN5330-01-065-7431
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S106269 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
PERIPHERAL DIAMETER: 5.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 5.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL DIAMETER5.750 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER5.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
SC-B-69481Interchangeable
interchangeable cross-reference
interchangeable
50330Interchangeable
interchangeable cross-reference
interchangeable
ASC1533289Interchangeable
interchangeable cross-reference
interchangeable
453100206Interchangeable
interchangeable cross-reference
interchangeable
7560K6Interchangeable
interchangeable cross-reference
interchangeable
020-012-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S106269?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S106269?
S106269 is a PACKING,PREFORMED.
What parts can replace S106269?
There are 12 known substitutes for S106269: SC-B-69481, 50330, ASC1533289 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S106269?
S106269 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-065-7431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S106269

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026