PartsTable
Technical Data Sheet
Download PDF

S1014BM3 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

S1014BM3: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BALL, bore_shape: STRAIGHT, bore_diameter: 0.6248 INCHES MINIMUM AND 0.6252 INCHES MAXIMUM IN, overall_width: 0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-055-3547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S1014BM3
NSN: 3110-00-055-3547
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BALL
bore_shapeSTRAIGHT
bore_diameter0.6248 INCHES MINIMUM AND 0.6252 INCHES MAXIMUM IN
overall_width0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresOUTER RING FRACTURED AT ONE POINT,2 STAINLESS STEEL RETAINMENT RINGS ON OD OF OUTER RING
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
NSN3110-00-055-3547
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S1014BM3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESOUTER RING FRACTURED AT ONE POINT,2 STAINLESS STEEL RETAINMENT RINGS ON OD OF OUTER RING
BORE DIAMETER0.6248 INCHES MINIMUM AND 0.6252 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OUTER RING
SUBSTITUTES & CROSS-REFERENCES 1
3TCNR10-14PReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S1014BM3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S1014BM3?
S1014BM3 is a BEARING,BALL,ANNULAR.
What parts can replace S1014BM3?
There is 1 known substitute for S1014BM3: 3TCNR10-14P. Substitute compatibility should be verified for your specific system.
What is the NSN for S1014BM3?
S1014BM3 is cataloged in the U.S. Government catalog under NSN 3110-00-055-3547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S1014BM3