S10015-3 — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

S10015-3: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN, material: STEEL EJECTOR SPRING, drive_type: SLOTTED, eyelet_length: 1.000 INCHES NOMINAL IN, stud_diameter: 0.193 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, special_features: COLOR BLACK. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-305-0308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S10015-3

NSN: 5325-01-305-0308
FSC: 5325 — Fastening Devices
CAGE: 05395 — L3HARRIS TECHNOLOGIES INTEGRATED SYSTEMS L.P. DBA L3HARRIS TECHNOLOGIES (USA)

SPECIFICATIONS

diameter	0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
material	STEEL EJECTOR SPRING
drive_type	SLOTTED
eyelet_length	1.000 INCHES NOMINAL IN
stud_diameter	0.193 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
special_features	COLOR BLACK
stud_head_height	0.275 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
surface_treatment	OXIDE FILM STUD
stud_assembly_style	STUD ASSEMBLY
securing_device_type	SPRING
eyelet_outside_diameter	0.253 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
turnlock_stud_head_style	FLAT FILLISTER
NSN	5325-01-305-0308

COMPONENT DIAGRAM

KEY FEATURES

•

EYELET OUTSIDE DIAMETER: 0.253 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN

•

DRIVE TYPE: SLOTTED

•

MATERIAL ACCOMMODATED THICKNESS: 0.080 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE STUD

•

DIAMETER: 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN

•

STUD HEAD HEIGHT: 0.275 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN

•

SECURING DEVICE TYPE: SPRING

TECHNICAL CHARACTERISTICS

EYELET OUTSIDE DIAMETER	0.253 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
DRIVE TYPE	SLOTTED
MATERIAL ACCOMMODATED THICKNESS	0.080 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE STUD
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A228 ASSN STD SINGLE MATERIAL RESPONSE EJECTOR SPRING
DIAMETER	0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
STUD HEAD HEIGHT	0.275 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
SECURING DEVICE TYPE	SPRING
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD	0.400 INCHES NOMINAL IN
TURNLOCK STUD HEAD STYLE	FLAT FILLISTER

OTHER ITEMS IN FSC 5325 — Fastening Devices

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317

SUBSTITUTES & CROSS-REFERENCES 2

PFSC35-40ARBReference document

Same NSN cross-reference

Reference document — Design control — primary reference

ES764B02Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy S10015-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S10015-3?

S10015-3 is a STUD ASSEMBLY,TURNLOCK FASTENER.

What parts can replace S10015-3?

There are 2 known substitutes for S10015-3: PFSC35-40ARB, ES764B02. Substitute compatibility should be verified for your specific system.

What is the NSN for S10015-3?

S10015-3 is cataloged in the U.S. Government catalog under NSN 5325-01-305-0308. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S10015-3 — STUD ASSEMBLY,TURNLOCK FASTENER

Request a Quote — S10015-3