PartsTable
Technical Data Sheet
Download PDF

S10-10-6432-1 — BELLOWS,PROTECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S10-10-6432-1: BELLOWS,PROTECTION.

The BELLOWS,PROTECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, neutral_length: 3.375 INCHES NOMINAL IN, thickness_at_both_ends: 0.156 INCHES NOMINAL IN, thickness_between_ends: 0.045 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, large_end_inside_diameter: 1.750 INCHES NOMINAL IN, small_end_inside_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-632-2849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S10-10-6432-1
NSN: 5340-00-632-2849
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
neutral_length3.375 INCHES NOMINAL IN
thickness_at_both_ends0.156 INCHES NOMINAL IN
thickness_between_ends0.045 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
large_end_inside_diameter1.750 INCHES NOMINAL IN
small_end_inside_diameter1.500 INCHES NOMINAL IN
large_end_outside_diameter2.156 INCHES NOMINAL IN
small_end_outside_diameter1.906 INCHES NOMINAL IN
NSN5340-00-632-2849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S10-10-6432-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALL END INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
LARGE END INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
LARGE END OUTSIDE DIAMETER: 2.156 INCHES NOMINAL IN
•
SMALL END OUTSIDE DIAMETER: 1.906 INCHES NOMINAL IN
•
NEUTRAL LENGTH: 3.375 INCHES NOMINAL IN
•
THICKNESS AT BOTH ENDS: 0.156 INCHES NOMINAL IN
•
THICKNESS BETWEEN ENDS: 0.045 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
SMALL END INSIDE DIAMETER1.500 INCHES NOMINAL IN
LARGE END INSIDE DIAMETER1.750 INCHES NOMINAL IN
LARGE END OUTSIDE DIAMETER2.156 INCHES NOMINAL IN
SMALL END OUTSIDE DIAMETER1.906 INCHES NOMINAL IN
NEUTRAL LENGTH3.375 INCHES NOMINAL IN
THICKNESS AT BOTH ENDS0.156 INCHES NOMINAL IN
THICKNESS BETWEEN ENDS0.045 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy S10-10-6432-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S10-10-6432-1?
S10-10-6432-1 is a BELLOWS,PROTECTION.
What is the NSN for S10-10-6432-1?
S10-10-6432-1 is cataloged in the U.S. Government catalog under NSN 5340-00-632-2849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S10-10-6432-1