PartsTable
Technical Data Sheet
Download PDF

S10-10-3368 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S10-10-3368: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 1.531 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN, nut_thickness: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_series: UNS, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-637-0785, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S10-10-3368
NSN: 5310-00-637-0785
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter1.531 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN
nut_thickness0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_seriesUNS
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM NUT
drive_point_depth0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
drive_point_width0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.969 INCHES IN
NSN5310-00-637-0785
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S10-10-3368 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AN-P-16 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNS
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD PITCH DIAMETERS: +0.9487 TO 0.9521 INCHES IN
•
DRIVE POINT WIDTH: 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.969 INCHES IN
•
NUT DIAMETER: 1.531 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAN-P-16 MIL STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNS
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD PITCH DIAMETERS+0.9487 TO 0.9521 INCHES IN
DRIVE POINT WIDTH0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.969 INCHES IN
NUT DIAMETER1.531 INCHES MINIMUM AND 1.594 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NUT THICKNESS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy S10-10-3368?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S10-10-3368?
S10-10-3368 is a NUT,PLAIN,ROUND.
What is the NSN for S10-10-3368?
S10-10-3368 is cataloged in the U.S. Government catalog under NSN 5310-00-637-0785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S10-10-3368