PartsTable
Technical Data Sheet
Download PDF

S0604 2-330 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S0604 2-330: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN, center_hole_diameter: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-288-3809, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S0604 2-330
NSN: 5330-01-288-3809
FSC: 5330 — Packing and Gasket Materials
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
center_hole_diameter2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5330-01-288-3809
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S0604 2-330 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
PERIPHERAL DIAMETER: 2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
PERIPHERAL DIAMETER2.492 INCHES MINIMUM AND 2.548 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
2-330S604-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
1927E44ITEM23Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S0604 2-330?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S0604 2-330?
S0604 2-330 is a PACKING,PREFORMED.
What parts can replace S0604 2-330?
There are 2 known substitutes for S0604 2-330: 2-330S604-70, 1927E44ITEM23. Substitute compatibility should be verified for your specific system.
What is the NSN for S0604 2-330?
S0604 2-330 is cataloged in the U.S. Government catalog under NSN 5330-01-288-3809. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S0604 2-330