PartsTable
Technical Data Sheet
Download PDF

S0604 2-134 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S0604 2-134: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: SILICONE OVERALL, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 2.068 INCHES NOMINAL IN, center_hole_diameter: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-143-7274, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S0604 2-134
NSN: 5330-00-143-7274
FSC: 5330 — Packing and Gasket Materials
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialSILICONE OVERALL
temp_rating-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter2.068 INCHES NOMINAL IN
center_hole_diameter1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
NSN5330-00-143-7274
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S0604 2-134 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
PERIPHERAL DIAMETER: 2.068 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
•
MATERIAL: SILICONE OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZY
ELONGATION PERCENTAGE125 MAXIMUM
PERIPHERAL DIAMETER2.068 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
MATERIALSILICONE OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
SUBSTITUTES & CROSS-REFERENCES 6
41E500-450PC53Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS9068-134SPPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS-9068-134Reference document
Same NSN cross-reference
Reference document — Secondary reference
PL41E-500-450PC53Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-134 S604-70Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-134Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy S0604 2-134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S0604 2-134?
S0604 2-134 is a PACKING,PREFORMED.
What parts can replace S0604 2-134?
There are 6 known substitutes for S0604 2-134: 41E500-450PC53, MS9068-134SPP, MS-9068-134 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S0604 2-134?
S0604 2-134 is cataloged in the U.S. Government catalog under NSN 5330-00-143-7274. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S0604 2-134

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.