PartsTable
Technical Data Sheet
Download PDF

S04706-006 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S04706-006: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 4.250 INCHES NOMINAL IN, special_features: ONE IN. DIA HOLE LOCATED IN CENTER OF ARC.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-251-8338, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S04706-006
NSN: 5340-00-251-8338
FSC: 5340 — Hardware, Commercial
CAGE: 72166 — B.W. ELLIOTT MANUFACTURING CO., LLC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width1.500 INCHES NOMINAL IN
overall_length4.250 INCHES NOMINAL IN
special_featuresONE IN. DIA HOLE LOCATED IN CENTER OF ARC
style_designatorCURVED ARCH
material_thickness0.063 INCHES NOMINAL IN
mounting_hole_size0.563 INCHES NOMINAL IN
inside_diameter/arch_length0.938 INCHES NOMINAL IN
distance_between_mounting_hole_centers3.000 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.969 INCHES NOMINAL IN
NSN5340-00-251-8338
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S04706-006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.563 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.000 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.563 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.000 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH4.250 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.969 INCHES NOMINAL IN
SPECIAL FEATURESONE IN. DIA HOLE LOCATED IN CENTER OF ARC
SUBSTITUTES & CROSS-REFERENCES 1
4706-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S04706-006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S04706-006?
S04706-006 is a STRAP,RETAINING.
What parts can replace S04706-006?
There is 1 known substitute for S04706-006: 4706-6. Substitute compatibility should be verified for your specific system.
What is the NSN for S04706-006?
S04706-006 is cataloged in the U.S. Government catalog under NSN 5340-00-251-8338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S04706-006

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.