PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S04706-003
S04706-003 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 1.250 INCHES NOMINAL IN, overall_length: 3.62625 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-251-8341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S04706-003
NSN: 5340-00-251-8341
FSC: 5340
CAGE: 72166 — B.W. ELLIOTT MANUFACTURING CO., LLC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width1.250 INCHES NOMINAL IN
overall_length3.62625 INCHES NOMINAL IN
style_designatorCURVED ARCH
material_thickness0.125 INCHES NOMINAL IN
mounting_hole_size0.563 INCHES NOMINAL IN
inside_diameter/arch_length2.813 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.906 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole1.970 INCHES NOMINAL IN
NSN5340-00-251-8341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S04706-003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PAD: NOT INCLUDED
•
CUSHION: NOT INCLUDED
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.906 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 2.813 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING PADNOT INCLUDED
CUSHIONNOT INCLUDED
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.906 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH2.813 INCHES NOMINAL IN
OVERALL WIDTH1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE1.970 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
9859-4Interchangeable
interchangeable cross-reference
interchangeable
EY2129Interchangeable
interchangeable cross-reference
interchangeable
4X7063Interchangeable
interchangeable cross-reference
interchangeable
47063Interchangeable
interchangeable cross-reference
interchangeable
5232939Interchangeable
interchangeable cross-reference
interchangeable
74J668000-119Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S04706-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S04706-003?
S04706-003 is a STRAP,RETAINING.
What parts can replace S04706-003?
There are 7 known substitutes for S04706-003: 9859-4, EY2129, 4X7063 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S04706-003?
S04706-003 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-251-8341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S04706-003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026