PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S041-8
S041-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, overall_length: 4.375 INCHES NOMINAL IN, handle_clearance: 1.493 INCHES MINIMUM AND 1.525 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-804-1519, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S041-8
NSN: 5340-00-804-1519
FSC: 5340
CAGE: 14519 — DESIGNATRONICS INC DIV STOCK DRIVE PRODUCTS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
overall_length4.375 INCHES NOMINAL IN
handle_clearance1.493 INCHES MINIMUM AND 1.525 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-E-171,FINISH 7.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.000 INCHES NOMINAL IN
NSN5340-00-804-1519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S041-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-E-171,FINISH 7.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.000 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-E-171,FINISH 7.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL IN
OVERALL LENGTH4.375 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
MOUNTING FACILITY QUANTITY2
HANDLE CLEARANCE1.493 INCHES MINIMUM AND 1.525 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2D15Upgraded Successor
successor cross-reference
successor
1270-01-14Upgraded Successor
successor cross-reference
successor
ABA12-5Upgraded Successor
successor cross-reference
successor
P-12FUpgraded Successor
successor cross-reference
successor
12701Upgraded Successor
successor cross-reference
successor
18841Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S041-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S041-8?
S041-8 is a HANDLE,BOW.
What parts can replace S041-8?
There are 20 known substitutes for S041-8: 2D15, 1270-01-14, ABA12-5 and 17 more. Substitute compatibility should be verified for your specific system.
Is S041-8 still available?
S041-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S041-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026