PartsTable
Technical Data Sheet
Download PDF

S041-7 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S041-7: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, overall_length: 4.375 INCHES NOMINAL IN, handle_clearance: 1.500 INCHES NOMINAL IN, surface_treatment: NICKEL OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-110-1290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S041-7
NSN: 5340-01-110-1290
FSC: 5340 — Hardware, Commercial
CAGE: 00328 — DESIGNATRONICS INCORPORATED DIV STERLING INSTRUMENTS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
overall_length4.375 INCHES NOMINAL IN
handle_clearance1.500 INCHES NOMINAL IN
surface_treatmentNICKEL OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length4.000 INCHES NOMINAL IN
NSN5340-01-110-1290
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S041-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.000 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL IN
OVERALL LENGTH4.375 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.500 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER ALLOY OVERALL
THREAD SERIES DESIGNATORUNF
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S041-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S041-7?
S041-7 is a HANDLE,BOW.
What is the NSN for S041-7?
S041-7 is cataloged in the U.S. Government catalog under NSN 5340-01-110-1290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S041-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.