PartsTable
Technical Data Sheet
PartsTable / O-RING / S0310-007F
S0310-007F ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN, center_hole_diameter: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3832, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S0310-007F
NSN: 5331-00-248-3832
FSC: 5331 — O-RING
CAGE: 33241 — GULFSTREAM AEROSPACE CORP DBA GULFSTREAM AEROSPACE TECHNOLOGIES (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
center_hole_diameter0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-248-3832
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S0310-007F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.274 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
13026Interchangeable
interchangeable cross-reference
interchangeable
013026Interchangeable
interchangeable cross-reference
interchangeable
C69007Interchangeable
interchangeable cross-reference
interchangeable
MS29513-27Interchangeable
interchangeable cross-reference
interchangeable
MS29513-027Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5315AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S0310-007F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S0310-007F?
S0310-007F is a O-RING.
What parts can replace S0310-007F?
There are 31 known substitutes for S0310-007F: 13026, 013026, C69007 and 28 more. Substitute compatibility should be verified for your specific system.
Is S0310-007F still available?
S0310-007F is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S0310-007F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026