PartsTable
Technical Data Sheet
Download PDF

S0154-JJ13 — TURNBUCKLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S0154-JJ13: TURNBUCKLE.

The TURNBUCKLE is a the manufacturer industrial component. Key specifications include length: 11.9375 INCHES NOMINAL IN, material: STEEL COMP 316 OVERALL, end_style: CLEVIS AND CLEVIS, body_style: HEX OPEN BODY, fork_width: 0.59 INCHES NOMINAL IN, body_length: 7.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-625-0140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S0154-JJ13
NSN: 5340-01-625-0140
FSC: 5340 — Hardware, Commercial
CAGE: 1CXX6 — SUNCOR STAINLESS, INC (USA)
SPECIFICATIONS
length11.9375 INCHES NOMINAL IN
materialSTEEL COMP 316 OVERALL
end_styleCLEVIS AND CLEVIS
body_styleHEX OPEN BODY
fork_width0.59 INCHES NOMINAL IN
body_length7.375 INCHES NOMINAL IN
pin_diameter0.46 INCHES NOMINAL IN
special_featuresWORKLOAD LIMIT IS 2,200 LBS. LBS
take-up_distance6.0 INCHES NOMINAL IN
nominal_thread_size0.50 INCHES ROD END IN
end_item_identificationBOATALT 49RC/
thread_quantity_per_inch13 ROD END
NSN5340-01-625-0140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S0154-JJ13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.46 INCHES NOMINAL IN
•
TAKE-UP DISTANCE: 6.0 INCHES NOMINAL IN
•
LENGTH: 11.9375 INCHES NOMINAL IN
•
BODY STYLE: HEX OPEN BODY
•
END STYLE: CLEVIS AND CLEVIS
•
NOMINAL THREAD SIZE: 0.50 INCHES ROD END IN
•
BODY LENGTH: 7.375 INCHES NOMINAL IN
•
FORK WIDTH: 0.59 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.46 INCHES NOMINAL IN
TAKE-UP DISTANCE6.0 INCHES NOMINAL IN
LENGTH11.9375 INCHES NOMINAL IN
BODY STYLEHEX OPEN BODY
END STYLECLEVIS AND CLEVIS
NOMINAL THREAD SIZE0.50 INCHES ROD END IN
BODY LENGTH7.375 INCHES NOMINAL IN
FORK WIDTH0.59 INCHES NOMINAL IN
SPECIAL FEATURESWORKLOAD LIMIT IS 2,200 LBS. LBS
END ITEM IDENTIFICATIONBOATALT 49RC/
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
30315T615Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S0154-JJ13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S0154-JJ13?
S0154-JJ13 is a TURNBUCKLE.
What parts can replace S0154-JJ13?
There is 1 known substitute for S0154-JJ13: 30315T615. Substitute compatibility should be verified for your specific system.
What is the NSN for S0154-JJ13?
S0154-JJ13 is cataloged in the U.S. Government catalog under NSN 5340-01-625-0140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S0154-JJ13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.