PartsTable
Technical Data Sheet
Download PDF

S0-832-24ZI — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S0-832-24ZI: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.745 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-152-4702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S0-832-24ZI
NSN: 5310-01-152-4702
FSC: 5310 — Nuts and Washers
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.745 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.312 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES IN
counterbore_diameter0.188 INCHES NOMINAL NUT IN
nut_counterbore_depth0.312 INCHES NOMINAL NUT IN
NSN5310-01-152-4702
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S0-832-24ZI · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NUT COUNTERBORE DEPTH: 0.312 INCHES NOMINAL NUT IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
COUNTERBORE DIAMETER: 0.188 INCHES NOMINAL NUT IN
•
PILOT DIAMETER: 0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NUT COUNTERBORE DEPTH0.312 INCHES NOMINAL NUT IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
COUNTERBORE DIAMETER0.188 INCHES NOMINAL NUT IN
PILOT DIAMETER0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
NUT HEIGHT0.745 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
7117504-3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SO-832-24Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S0-832-24ZI?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S0-832-24ZI?
S0-832-24ZI is a NUT,PLAIN,CLINCH.
What parts can replace S0-832-24ZI?
There are 2 known substitutes for S0-832-24ZI: 7117504-3, SO-832-24. Substitute compatibility should be verified for your specific system.
What is the NSN for S0-832-24ZI?
S0-832-24ZI is cataloged in the U.S. Government catalog under NSN 5310-01-152-4702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S0-832-24ZI

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.