PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S-4-E
S-4-E ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ENGRAVER-ROUTER,COMPUTERIZED is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-728-2021, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-4-E
NSN: 4730-00-728-2021
FSC: 4730
CAGE: 11649 — CAJON CO (USA)
SPECIFICATIONS
Part NumberS-4-E
NSN4730-00-728-2021
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: S-4-E · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID SECOND RESPONSE
•
FLOW ANGLE: 90.0 DEGREES
•
NOMINAL THREAD SIZE: 0.250 INCHES ALL ENDS IN
•
MATERIAL: STEEL OVERALL
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
THREAD SERIES DESIGNATOR: NPT ALL ENDS
TECHNICAL CHARACTERISTICS (FLIS)
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID SECOND RESPONSE
FLOW ANGLE90.0 DEGREES
NOMINAL THREAD SIZE0.250 INCHES ALL ENDS IN
MATERIALSTEEL OVERALL
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
THREAD SERIES DESIGNATORNPT ALL ENDS
LEG LENGTH0.969 INCHES NOMINAL ALL ENDS IN
MEDIA FOR WHICH DESIGNEDWATER-OIL-GAS FIRST RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2-20244Interchangeable
interchangeable cross-reference
interchangeable
13217E2216-1Interchangeable
interchangeable cross-reference
interchangeable
C3509X4Interchangeable
interchangeable cross-reference
interchangeable
25UJ-04Interchangeable
interchangeable cross-reference
interchangeable
7777*MEJI-EMZ5Interchangeable
interchangeable cross-reference
interchangeable
S4EInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S-4-E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-4-E?
S-4-E is a ENGRAVER-ROUTER,COMPUTERIZED.
What parts can replace S-4-E?
There are 20 known substitutes for S-4-E: 2-20244, 13217E2216-1, C3509X4 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S-4-E?
S-4-E is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-728-2021. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-4-E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026