PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S-36062RSNRJ
S-36062RSNRJ ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 30.0 MILLIMETERS NOMINAL MM, overall_width: 1.1875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-36062RSNRJ
NSN: 3110-00-156-5045
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter30.0 MILLIMETERS NOMINAL MM
overall_width1.1875 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresW/O GREASE PLUG
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
bearing_seal_typeCONTACT
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
lubrication_materialGREASE
NSN3110-00-156-5045
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: S-36062RSNRJ · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY EXTERNAL MOUNTING METHOD
•
BORE SHAPE: STRAIGHT
•
SEAL QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY EXTERNAL MOUNTING METHOD
BORE SHAPESTRAIGHT
SEAL QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
43606Interchangeable
interchangeable cross-reference
interchangeable
GGG-B-383 TY1CLAInterchangeable
interchangeable cross-reference
interchangeable
GGG-B-383Interchangeable
interchangeable cross-reference
interchangeable
70144Interchangeable
interchangeable cross-reference
interchangeable
74E14N111Interchangeable
interchangeable cross-reference
interchangeable
T-61719Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S-36062RSNRJ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-36062RSNRJ?
S-36062RSNRJ is a BEARING,BALL,ANNULAR.
What parts can replace S-36062RSNRJ?
There are 8 known substitutes for S-36062RSNRJ: 43606, GGG-B-383 TY1CLA, GGG-B-383 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S-36062RSNRJ?
S-36062RSNRJ is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-36062RSNRJ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026