S-3-26-8 — SHAFT AND PINION ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

S-3-26-8: SHAFT AND PINION ASSEMBLY.

The SHAFT AND PINION ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, tooth_form: STANDARD, pitch_diameter: 1.1000 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES, teeth_quantity: 11. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-018-6610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

S-3-26-8

NSN: 3020-01-018-6610
NIINs: 010186610, 010192804
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 31923 — TODD COMBUSTION INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
body_style	PLAIN, SOLID
tooth_form	STANDARD
pitch_diameter	1.1000 INCHES NOMINAL IN
pressure_angle	14.5000 DEGREES
teeth_quantity	11
special_features	INCLUDES THREADED HOLE 0.375 16 UNC
style_designator	PROTRUDING HUB
features_provided	CASEHARDENED
end_nominal_length	1.500 INCHES FIRST END IN
face_nominal_width	1.1000 INCHES IN
end_nominal_diameter	0.750 INCHES FIRST END IN
NSN	3020-01-018-6610

COMPONENT DIAGRAM

KEY FEATURES

•

TEETH QUANTITY: 11

•

SECOND STEP NOMINAL DIAMETER: 0.925 INCHES FIRST END IN

•

BODY STYLE: PLAIN, SOLID

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 15.000 INCHES FIRST END IN

•

FIRST STEP NOMINAL LENGTH: 12.000 INCHES FIRST END IN

•

SECOND STEP NOMINAL LENGTH: 1.500 INCHES FIRST END IN

•

STYLE DESIGNATOR: PROTRUDING HUB

•

PITCH DIAMETER: 1.1000 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

TEETH QUANTITY	11
SECOND STEP NOMINAL DIAMETER	0.925 INCHES FIRST END IN
BODY STYLE	PLAIN, SOLID
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	15.000 INCHES FIRST END IN
FIRST STEP NOMINAL LENGTH	12.000 INCHES FIRST END IN
SECOND STEP NOMINAL LENGTH	1.500 INCHES FIRST END IN
STYLE DESIGNATOR	PROTRUDING HUB
PITCH DIAMETER	1.1000 INCHES NOMINAL IN
TOOTH FORM	STANDARD
FIRST STEP NOMINAL DIAMETER	0.8125 INCHES FIRST END IN

SUBSTITUTES & CROSS-REFERENCES 4

ND40069PC26Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

D-42085 PIECE 2Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

N-49704PC26Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

D-42085PC26Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy S-3-26-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is S-3-26-8?

S-3-26-8 is a SHAFT AND PINION ASSEMBLY.

What parts can replace S-3-26-8?

There are 4 known substitutes for S-3-26-8: ND40069PC26, D-42085 PIECE 2, N-49704PC26 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for S-3-26-8?

S-3-26-8 is cataloged in the U.S. Government catalog under NSN 3020-01-018-6610. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

S-3-26-8 — SHAFT AND PINION ASSEMBLY

Request a Quote — S-3-26-8