PartsTable
Technical Data Sheet
Download PDF

S-16448-6 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

S-16448-6: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, thread_class: 3A A, fastener_length: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, special_features: INCLUDES A PLASTIC POLYAMIDE INSERT LOCATED IN THE POINT. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-270-3898, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-16448-6
NSN: 5305-01-270-3898
FSC: 5305 — Screws
CAGE: 26233 — NYLOK LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
thread_class3A A
fastener_length0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
special_featuresINCLUDES A PLASTIC POLYAMIDE INSERT LOCATED IN THE POINT
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch32
NSN5305-01-270-3898
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: S-16448-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
FASTENER LENGTH0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SPECIAL FEATURESINCLUDES A PLASTIC POLYAMIDE INSERT LOCATED IN THE POINT
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
965983-6Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
SK2541-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S-16448-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-16448-6?
S-16448-6 is a SETSCREW.
What parts can replace S-16448-6?
There are 2 known substitutes for S-16448-6: 965983-6, SK2541-6. Substitute compatibility should be verified for your specific system.
What is the NSN for S-16448-6?
S-16448-6 is cataloged in the U.S. Government catalog under NSN 5305-01-270-3898. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-16448-6