PartsTable
Technical Data Sheet
Download PDF

S-1470-1-2 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

S-1470-1-2: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include thread_class: 2A A, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN, thread_direction: LEFT-HAND, internal_drive_style: HEXAGON, nominal_thread_diameter: 0.164 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-194-0608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-1470-1-2
NSN: 5305-01-194-0608
FSC: 5305 — Screws
CAGE: 33667 — KING ENGINEERING CORPORATION DBA KING-GAGE SYSTEMS (USA)
SPECIFICATIONS
thread_class2A A
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
fastener_length0.625 INCHES NOMINAL IN
thread_directionLEFT-HAND
internal_drive_styleHEXAGON
nominal_thread_diameter0.164 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5305-01-194-0608
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: S-1470-1-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
THREAD DIRECTION: LEFT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD DIRECTIONLEFT-HAND
INTERNAL DRIVE STYLEHEXAGON
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
E-4549-1-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S-1470-1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-1470-1-2?
S-1470-1-2 is a SCREW,CAP,SOCKET HEAD.
What parts can replace S-1470-1-2?
There is 1 known substitute for S-1470-1-2: E-4549-1-2. Substitute compatibility should be verified for your specific system.
What is the NSN for S-1470-1-2?
S-1470-1-2 is cataloged in the U.S. Government catalog under NSN 5305-01-194-0608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-1470-1-2