PartsTable
Technical Data Sheet

S-1100-5/8X4 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S-1100-5/8X4: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include diameter: 0.625 INCHES NOMINAL IN, material: STEEL COMP 1039 OVERALL, head_style: THUMB NO. 9, surface_treatment: CADMIUM OR ZINC OVERALL, hole_arrangement_style: ONE END DRILLED.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-236-7208, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-1100-5/8X4
NSN: 5315-01-236-7208
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96652 — MEDALIST INDUSTRIES INC LEITZKE DIV (USA)
SPECIFICATIONS
diameter0.625 INCHES NOMINAL IN
materialSTEEL COMP 1039 OVERALL
head_styleTHUMB NO. 9
surface_treatmentCADMIUM OR ZINC OVERALL
hole_arrangement_styleONE END DRILLED
NSN5315-01-236-7208
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S-1100-5/8X4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
DIAMETER: 0.625 INCHES NOMINAL IN
•
HEAD STYLE: THUMB NO. 9
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL COMP 1039 OVERALL
TECHNICAL CHARACTERISTICS
HOLE ARRANGEMENT STYLEONE END DRILLED
DIAMETER0.625 INCHES NOMINAL IN
HEAD STYLETHUMB NO. 9
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL COMP 1039 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
98412A132Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8457648-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy S-1100-5/8X4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-1100-5/8X4?
S-1100-5/8X4 is a PIN,STRAIGHT,HEADED.
What parts can replace S-1100-5/8X4?
There are 2 known substitutes for S-1100-5/8X4: 98412A132, 8457648-2. Substitute compatibility should be verified for your specific system.
What is the NSN for S-1100-5/8X4?
S-1100-5/8X4 is cataloged in the U.S. Government catalog under NSN 5315-01-236-7208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-1100-5/8X4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.