PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S-104P3-2PART105-10
S-104P3-2PART105-10 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The DISK,VALVE is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND STEEL, inside_diameter: 5.750 INCHES NOMINAL IN, pressure_rating: 320.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 325.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS, outside_diameter: 7.062 INCHES NOMINAL IN, style_designator: SWING CHECK, under_flange_height: 0.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-013-9969, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-104P3-2PART105-10
NSN: 4820-01-013-9969
FSC: 4820
CAGE: 79067 — APCO/VALVE & PRIMER CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC AND STEEL
inside_diameter5.750 INCHES NOMINAL IN
pressure_rating320.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 325.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
outside_diameter7.062 INCHES NOMINAL IN
style_designatorSWING CHECK
under_flange_height0.281 INCHES NOMINAL IN
flange_seat_to_disk_end_height1.250 INCHES NOMINAL IN
NSN4820-01-013-9969
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: S-104P3-2PART105-10 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRESSURE RATING: 320.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 325.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
UNDER FLANGE HEIGHT: 0.281 INCHES NOMINAL IN
•
INSIDE DIAMETER: 5.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC AND STEEL
•
FLANGE SEAT TO DISK END HEIGHT: 1.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SWING CHECK
•
OUTSIDE DIAMETER: 7.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PRESSURE RATING320.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 325.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
UNDER FLANGE HEIGHT0.281 INCHES NOMINAL IN
INSIDE DIAMETER5.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC AND STEEL
FLANGE SEAT TO DISK END HEIGHT1.250 INCHES NOMINAL IN
STYLE DESIGNATORSWING CHECK
OUTSIDE DIAMETER7.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
10510Interchangeable
interchangeable cross-reference
interchangeable
5001/2078Interchangeable
interchangeable cross-reference
interchangeable
10J10Interchangeable
interchangeable cross-reference
interchangeable
13J45MInterchangeable
interchangeable cross-reference
interchangeable
211013Interchangeable
interchangeable cross-reference
interchangeable
7606Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S-104P3-2PART105-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-104P3-2PART105-10?
S-104P3-2PART105-10 is a DISK,VALVE.
What parts can replace S-104P3-2PART105-10?
There are 19 known substitutes for S-104P3-2PART105-10: 10510, 5001/2078, 10J10 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S-104P3-2PART105-10?
S-104P3-2PART105-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-013-9969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-104P3-2PART105-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026