PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S-10130
S-10130 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include color: WHITE OVERALL, material: ACRYLIC FOAM OVERALL, nominal_width: 0.750 INCHES IN, nominal_length: 36.0 YARDS, surface_luster: LUSTERLESS, adhesive_location: BOTH SIDES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-269-3466, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-10130
NSN: 5310-00-269-3466
FSC: 5310
CAGE: 03481 — BFGOODRICH CO THE AEROSPACE DIV ENGINEERED POLYMER PRODUCTS (USA)
SPECIFICATIONS
colorWHITE OVERALL
materialACRYLIC FOAM OVERALL
nominal_width0.750 INCHES IN
nominal_length36.0 YARDS
surface_lusterLUSTERLESS
adhesive_locationBOTH SIDES
features_providedLINER
material_transparencyOPAQUE
minimum_tensile_strength100 POUNDS PER SQUARE INCH LBS
nominal_overall_thickness0.0450 INCHES IN
NSN5310-00-269-3466
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S-10130 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NUT DIAMETER: 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.038 INCHES NOMINAL IN
•
SHANK END TYPE: OPEN
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNF
•
MATERIAL: STEEL COMP 1108 OR STEEL COMP 1110 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NUT DIAMETER0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD HEIGHT0.038 INCHES NOMINAL IN
SHANK END TYPEOPEN
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD QUANTITY PER INCH32
THREAD SERIESUNF
MATERIALSTEEL COMP 1108 OR STEEL COMP 1110 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI 1108 FED STD 1ST MATERIAL RESPONSE OR FED STD 66,AISI 1110 FED STD 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
4945Interchangeable
interchangeable cross-reference
interchangeable
S-10130Interchangeable
interchangeable cross-reference
interchangeable
MS27130-S26Interchangeable
Same NIIN cross-reference
interchangeable
NAS1329S3-130Interchangeable
Same NIIN cross-reference
interchangeable
5581276Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy S-10130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-10130?
S-10130 is a NUT,PLAIN,BLIND RIVET.
What parts can replace S-10130?
There are 5 known substitutes for S-10130: 4945, S-10130, MS27130-S26 and 2 more. Substitute compatibility should be verified for your specific system.
Is S-10130 still available?
S-10130 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-10130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026