PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S-1007 PIECE 50
S-1007 PIECE 50 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include length: 0.125 INCHES NOMINAL IN, material: COPPER ALLOY, design_type: PLATE, orifice_diameter: 0.125 INCHES NOMINAL IN, outside_diameter: 0.750 INCHES NOMINAL IN, thread_provision: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-178-7156, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-1007 PIECE 50
NSN: 4730-01-178-7156
FSC: 4730
CAGE: 93591 — PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP (USA)
SPECIFICATIONS
length0.125 INCHES NOMINAL IN
materialCOPPER ALLOY
design_typePLATE
orifice_diameter0.125 INCHES NOMINAL IN
outside_diameter0.750 INCHES NOMINAL IN
thread_provisionUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
NSN4730-01-178-7156
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: S-1007 PIECE 50 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
LENGTH: 0.125 INCHES NOMINAL IN
•
DESIGN TYPE: PLATE
•
ORIFICE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
•
THREAD PROVISION: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
LENGTH0.125 INCHES NOMINAL IN
DESIGN TYPEPLATE
ORIFICE DIAMETER0.125 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
THREAD PROVISIONUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5KSP11DG913Interchangeable
interchangeable cross-reference
interchangeable
S1007Interchangeable
interchangeable cross-reference
interchangeable
5KSP11DG822SInterchangeable
interchangeable cross-reference
interchangeable
633323Interchangeable
interchangeable cross-reference
interchangeable
C0180-018-0250SInterchangeable
interchangeable cross-reference
interchangeable
35269Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S-1007 PIECE 50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-1007 PIECE 50?
S-1007 PIECE 50 is a RESTRICTOR,FLUID FLOW.
What parts can replace S-1007 PIECE 50?
There are 16 known substitutes for S-1007 PIECE 50: 5KSP11DG913, S1007, 5KSP11DG822S and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S-1007 PIECE 50?
S-1007 PIECE 50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-178-7156. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-1007 PIECE 50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026