PartsTable
Technical Data Sheet
Download PDF

S-100-B-3.5-G — S-100-B-3.5-G

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

S-100-B-3.5-G: S-100-B-3.5-G.

The S-100-B-3.5-G is a the manufacturer industrial component. Key specifications include circuit_type: CURRENT, handle_length: 0.972 INCHES NOMINAL IN, overall_length: 1.310 INCHES NOMINAL IN, overall_diameter: 0.054 INCHES NOMINAL IN, precious_material: GOLD, fsc_application_data: TEST SET,ELECT. EQUIP..

This part is cataloged in the U.S. Government catalog under NSN 6625-01-376-4613, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ S-100-B-3.5-G
NSN: 6625-01-376-4613
FSC: 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
CAGE: 0A828 — INTERCONNECT DEVICES INC DBA SYNERGETIX (USA)
SPECIFICATIONS
circuit_typeCURRENT
handle_length0.972 INCHES NOMINAL IN
overall_length1.310 INCHES NOMINAL IN
overall_diameter0.054 INCHES NOMINAL IN
precious_materialGOLD
fsc_application_dataTEST SET,ELECT. EQUIP.
tip_termination_typeNEEDLE POINT
furnished_items_and_quantitySPRING 1; PLUNGER 1; CONTACT BARREL 1
precious_material_and_locationPLUNGER GOLD
NSN6625-01-376-4613
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K S-100-B-3.5-G OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN S-100-B-3.5-G MFR OEM
KEY FEATURES
•
FSC APPLICATION DATA: TEST SET,ELECT. EQUIP.
•
CIRCUIT TYPE: CURRENT
•
HANDLE LENGTH: 0.972 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.054 INCHES NOMINAL IN
•
PRECIOUS MATERIAL: GOLD
•
TIP TERMINATION TYPE: NEEDLE POINT
•
PRECIOUS MATERIAL AND LOCATION: PLUNGER GOLD
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATATEST SET,ELECT. EQUIP.
CIRCUIT TYPECURRENT
HANDLE LENGTH0.972 INCHES NOMINAL IN
OVERALL DIAMETER0.054 INCHES NOMINAL IN
PRECIOUS MATERIALGOLD
OVERALL LENGTH1.310 INCHES NOMINAL IN
TIP TERMINATION TYPENEEDLE POINT
PRECIOUS MATERIAL AND LOCATIONPLUNGER GOLD
FURNISHED ITEMS AND QUANTITYSPRING 1; PLUNGER 1; CONTACT BARREL 1
OTHER ITEMS IN FSC 6625 — Electrical and Electronic Properties Measuring and Testing Instruments
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6625-00-000-0309 6625-00-000-0480 6625-00-001-1338 6625-00-001-1341 6625-00-001-1371 6625-00-001-1373 6625-00-001-1374 6625-00-001-1377
SUBSTITUTES & CROSS-REFERENCES 1
S25B-4-DGReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S-100-B-3.5-G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-100-B-3.5-G?
S-100-B-3.5-G is a S-100-B-3.5-G. It is classified as a MRO (MRO_GENERAL).
What parts can replace S-100-B-3.5-G?
There is 1 known substitute for S-100-B-3.5-G: S25B-4-DG. Substitute compatibility should be verified for your specific system.
What is the NSN for S-100-B-3.5-G?
S-100-B-3.5-G is cataloged in the U.S. Government catalog under NSN 6625-01-376-4613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-100-B-3.5-G