PartsTable
Technical Data Sheet
Download PDF

S-0428-1C — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

S-0428-1C: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.235 INCHES MAXIMUM IN, nut_diameter: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN, pilot_length: 0.054 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-047-7909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S-0428-1C
NSN: 5310-01-047-7909
FSC: 5310 — Nuts and Washers
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.235 INCHES MAXIMUM IN
nut_diameter0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
pilot_length0.054 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
pilot_diameter0.337 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN
hardness_rating50.0 ROCKWELL C NOMINAL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.250 INCHES IN
NSN5310-01-047-7909
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S-0428-1C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HARDNESS RATING: 50.0 ROCKWELL C NOMINAL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.337 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.054 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HARDNESS RATING50.0 ROCKWELL C NOMINAL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
PILOT DIAMETER0.337 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN
PILOT LENGTH0.054 INCHES MAXIMUM IN
NUT HEIGHT0.235 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
0405-111Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S-0428-1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S-0428-1C?
S-0428-1C is a NUT,PLAIN,CLINCH.
What parts can replace S-0428-1C?
There is 1 known substitute for S-0428-1C: 0405-111. Substitute compatibility should be verified for your specific system.
What is the NSN for S-0428-1C?
S-0428-1C is cataloged in the U.S. Government catalog under NSN 5310-01-047-7909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S-0428-1C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.