RY-166400ITEM 3 — IMPELLER,PUMP,CENTRIFUGAL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

RY-166400ITEM 3: IMPELLER,PUMP,CENTRIFUGAL.

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include material: STEEL UNS J94650, blade_type: BACKWARD CURVE, overall_diameter: 7.000 INCHES NOMINAL IN, special_features: W/PIN,DOWEL 0.187 IN. BY 0.500 IN.

LG AND O-RING 0.125 THK,2.625 IN. ID,2.875 IN. OD IN, material_document_and_classification: ASTM A296, CN7MS ASSN STD SINGLE MATERIAL RESPONSE, rotation_direction_for_which_designed: CLOCKWISE.

This part is cataloged in the U.S. Government catalog under NSN 4320-01-052-5569, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

RY-166400ITEM 3

NSN: 4320-01-052-5569
FSC: 4320 — Power and Hand Pumps
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)

SPECIFICATIONS

material	STEEL UNS J94650
blade_type	BACKWARD CURVE
overall_diameter	7.000 INCHES NOMINAL IN
special_features	W/PIN,DOWEL 0.187 IN. BY 0.500 IN. LG AND O-RING 0.125 THK,2.625 IN. ID,2.875 IN. OD IN
material_document_and_classification	ASTM A296, CN7MS ASSN STD SINGLE MATERIAL RESPONSE
rotation_direction_for_which_designed	CLOCKWISE
NSN	4320-01-052-5569

COMPONENT DIAGRAM

KEY FEATURES

•

OVERALL DIAMETER: 7.000 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A296, CN7MS ASSN STD SINGLE MATERIAL RESPONSE

•

MATERIAL: STEEL UNS J94650

•

ROTATION DIRECTION FOR WHICH DESIGNED: CLOCKWISE

•

BLADE TYPE: BACKWARD CURVE

TECHNICAL CHARACTERISTICS

OVERALL DIAMETER	7.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A296, CN7MS ASSN STD SINGLE MATERIAL RESPONSE
SPECIAL FEATURES	W/PIN,DOWEL 0.187 IN. BY 0.500 IN. LG AND O-RING 0.125 THK,2.625 IN. ID,2.875 IN. OD IN
MATERIAL	STEEL UNS J94650
ROTATION DIRECTION FOR WHICH DESIGNED	CLOCKWISE
BLADE TYPE	BACKWARD CURVE

SUBSTITUTES & CROSS-REFERENCES 4

95604700PHReference document

Same NSN cross-reference

Reference document — Secondary reference

RY-166400Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

956047-00Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

RY-166400 ITEMReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RY-166400ITEM 3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RY-166400ITEM 3?

RY-166400ITEM 3 is a IMPELLER,PUMP,CENTRIFUGAL.

What parts can replace RY-166400ITEM 3?

There are 4 known substitutes for RY-166400ITEM 3: 95604700PH, RY-166400, 956047-00 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RY-166400ITEM 3?

RY-166400ITEM 3 is cataloged in the U.S. Government catalog under NSN 4320-01-052-5569. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RY-166400ITEM 3 — IMPELLER,PUMP,CENTRIFUGAL

Request a Quote — RY-166400ITEM 3