PartsTable
Technical Data Sheet
Download PDF

RX104 — RECTIFIER,METALLIC

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

RX104: RECTIFIER,METALLIC.

The RECTIFIER,METALLIC is a the manufacturer industrial component. Key specifications include material: SELENIUM, load_type: RESISTIVE, bore_diameter: 0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN, overall_width: 0.688 INCHES NOMINAL IN, terminal_type: SOLDER LUG, overall_height: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-075-3255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
RX104
NSN: 3110-00-075-3255
NIINs: 000753255, 007128546
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSELENIUM
load_typeRESISTIVE
bore_diameter0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
overall_width0.688 INCHES NOMINAL IN
terminal_typeSOLDER LUG
overall_height0.688 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
stack_quantity1
mounting_methodHOLE
inner_ring_width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
outer_ring_width0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
terminal_quantity2
NSN3110-00-075-3255
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: RX104 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SEAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MULTI-0URPOSE NO 2,FSCM 59595 MFR REF SINGLE MATERIAL RESPONSE
•
INNER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
BORE DIAMETER0.7500 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
MATERIALRUBBER SEAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMULTI-0URPOSE NO 2,FSCM 59595 MFR REF SINGLE MATERIAL RESPONSE
INNER RING WIDTH0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
210Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy RX104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RX104?
RX104 is a RECTIFIER,METALLIC.
What parts can replace RX104?
There is 1 known substitute for RX104: 210. Substitute compatibility should be verified for your specific system.
What is the NSN for RX104?
RX104 is cataloged in the U.S. Government catalog under NSN 3110-00-075-3255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RX104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.