RWR89S1870FS — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RWR89S1870FS: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 0.560 INCHES NOMINAL IN, body_diameter: 0.187 INCHES NOMINAL IN, cubic_measure: 0.016 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-193-2130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RWR89S1870FS

NSN: 5905-01-193-2130
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_length	0.560 INCHES NOMINAL IN
body_diameter	0.187 INCHES NOMINAL IN
cubic_measure	0.016 CUBIC INCHES
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
terminal_length	1.500 INCHES MINIMUM IN
style_designator	AXIAL TERMINAL EACH END
electrical_resistance	187.000 OHMS
reliability_indicator	ESTABLISHED
unpackaged_unit_weight	3.0 GRAMS G
specification/standard_data	81349-MIL-R-39007/11 GOVERNMENT SPECIFICATION
resistance_tolerance_in_percent	-1.000 TO 1.000
NSN	5905-01-193-2130

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -20.0 TO 20.0

•

BODY DIAMETER: 0.187 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 187.000 OHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 275.0

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-20.0 TO 20.0
BODY DIAMETER	0.187 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	187.000 OHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 275.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001

SUBSTITUTES & CROSS-REFERENCES 6

4171530-56Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-PRF-39007/11Reference document

Same NSN cross-reference

Reference document — Identification reference

RWR89S1870FMReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-R-39007/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

RWR89S1870FRReference document

Same NSN cross-reference

Reference document — Secondary reference

0811-1016Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy RWR89S1870FS?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RWR89S1870FS?

RWR89S1870FS is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RWR89S1870FS?

There are 6 known substitutes for RWR89S1870FS: 4171530-56, MIL-PRF-39007/11, RWR89S1870FM and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RWR89S1870FS?

RWR89S1870FS is cataloged in the U.S. Government catalog under NSN 5905-01-193-2130. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RWR89S1870FS — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RWR89S1870FS