RWR74S1400FP — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RWR74S1400FP: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 0.875 INCHES NOMINAL IN, body_diameter: 0.312 INCHES NOMINAL IN, cubic_measure: 0.063 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-186-6843, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RWR74S1400FP

NSN: 5905-01-186-6843
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_length	0.875 INCHES NOMINAL IN
body_diameter	0.312 INCHES NOMINAL IN
cubic_measure	0.063 CUBIC INCHES
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
terminal_length	1.500 INCHES MINIMUM IN
style_designator	AXIAL TERMINAL EACH END
electrical_resistance	140.000 OHMS
reliability_indicator	ESTABLISHED
unpackaged_unit_weight	5.000 GRAMS G
reactance_characteristic	INDUCTIVE
specification/standard_data	81349-MIL-R-39007/6 GOVERNMENT SPECIFICATION
NSN	5905-01-186-6843

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -20.0 TO 20.0

•

BODY DIAMETER: 0.312 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 140.000 OHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

REACTANCE CHARACTERISTIC: INDUCTIVE

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-20.0 TO 20.0
BODY DIAMETER	0.312 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	140.000 OHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
REACTANCE CHARACTERISTIC	INDUCTIVE
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 275.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END

SUBSTITUTES & CROSS-REFERENCES 5

MIL-PRF-39007/6Reference document

Same NSN cross-reference

Reference document — Identification reference

RWR74S1400FSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MILR39007-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

RWR74S1400FRReference document

Same NSN cross-reference

Reference document — Secondary reference

10525885Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy RWR74S1400FP?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RWR74S1400FP?

RWR74S1400FP is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RWR74S1400FP?

There are 5 known substitutes for RWR74S1400FP: MIL-PRF-39007/6, RWR74S1400FS, MILR39007-6 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RWR74S1400FP?

RWR74S1400FP is cataloged in the U.S. Government catalog under NSN 5905-01-186-6843. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RWR74S1400FP — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RWR74S1400FP