RW70U301J — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RW70U301J: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 0.406 INCHES NOMINAL IN, body_diameter: 0.094 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.500 INCHES MINIMUM IN, style_designator: AXIAL TERMINAL EACH END. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-068-2450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RW70U301J

NSN: 5905-01-068-2450
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_length	0.406 INCHES NOMINAL IN
body_diameter	0.094 INCHES NOMINAL IN
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
terminal_length	1.500 INCHES MINIMUM IN
style_designator	AXIAL TERMINAL EACH END
electrical_resistance	301.000 OHMS
reliability_indicator	ESTABLISHED
reactance_characteristic	INDUCTIVE
specification/standard_data	81349-MIL-PRF-39007/8 GOVERNMENT SPECIFICATION
resistance_tolerance_in_percent	-1.000 TO 1.000
ambient_temp_at_full_rated_power	25.0 CELSIUS DEGC
NSN	5905-01-068-2450

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -20.0 TO 20.0

•

BODY DIAMETER: 0.094 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 301.000 OHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

REACTANCE CHARACTERISTIC: INDUCTIVE

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-20.0 TO 20.0
BODY DIAMETER	0.094 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	301.000 OHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
REACTANCE CHARACTERISTIC	INDUCTIVE
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 275.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END

SUBSTITUTES & CROSS-REFERENCES 9

443-1849-335Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

495048T212Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

BWH301JReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

240E3015Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MIL-PRF-39007/8Reference document

Same NSN cross-reference

Reference document — Identification reference

RS1A300R0FReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy RW70U301J?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RW70U301J?

RW70U301J is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RW70U301J?

There are 9 known substitutes for RW70U301J: 443-1849-335, 495048T212, BWH301J and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for RW70U301J?

RW70U301J is cataloged in the U.S. Government catalog under NSN 5905-01-068-2450. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RW70U301J — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RW70U301J