RW33VR18 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

RW33VR18: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 3.000 INCHES NOMINAL IN, body_diameter: 0.594 INCHES MAXIMUM IN, cubic_measure: 0.831 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED, terminal_length: 0.453 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-044-4148, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ RW33VR18

NSN: 5905-00-044-4148
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_length	3.000 INCHES NOMINAL IN
body_diameter	0.594 INCHES MAXIMUM IN
cubic_measure	0.831 CUBIC INCHES
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCAPSULATED
terminal_length	0.453 INCHES NOMINAL IN
style_designator	RADIAL TERMINAL EACH END
electrical_resistance	0.180 OHMS
reliability_indicator	NOT ESTABLISHED
reactance_characteristic	INDUCTIVE
specification/standard_data	81349-MIL-R-26/3 GOVERNMENT SPECIFICATION
resistance_tolerance_in_percent	-5.000 TO 5.000
NSN	5905-00-044-4148

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -5.000 TO 5.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -400.0 TO 400.0

•

BODY DIAMETER: 0.594 INCHES MAXIMUM IN

•

ELECTRICAL RESISTANCE: 0.180 OHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: TAB, SOLDER LUG

•

TERMINAL LENGTH: 0.453 INCHES NOMINAL IN

•

REACTANCE CHARACTERISTIC: INDUCTIVE

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-5.000 TO 5.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-400.0 TO 400.0
BODY DIAMETER	0.594 INCHES MAXIMUM IN
ELECTRICAL RESISTANCE	0.180 OHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	TAB, SOLDER LUG
TERMINAL LENGTH	0.453 INCHES NOMINAL IN
REACTANCE CHARACTERISTIC	INDUCTIVE
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 350.0
STYLE DESIGNATOR	RADIAL TERMINAL EACH END

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 2

MIL-PRF-26/3Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-R-26/3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy RW33VR18?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is RW33VR18?

RW33VR18 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace RW33VR18?

There are 2 known substitutes for RW33VR18: MIL-PRF-26/3, MIL-R-26/3. Substitute compatibility should be verified for your specific system.

What is the NSN for RW33VR18?

RW33VR18 is cataloged in the U.S. Government catalog under NSN 5905-00-044-4148. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

RW33VR18 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — RW33VR18